USB portable external hard drive installation is very simple, it should be no problem. Carefully check the cable and found that all normal; re-for a USB port, press “F5″ key to refresh the system, fault still. Recall carefully re-start the computer, connect the USB plug into the USB host interface, the system does not automatically detect. Therefore, enter “Control Panel”, double-click “System” icon, select “Device Manager” tab, double-check all the equipment, although not found in the phenomenon of resource conflict, but the “disk drives” and “hard disk controller” two options Under no increase in any device. It seems only in the CMOS, look for why.
Restart the computer, press “Del” key to enter CMOS, select “Pnp / Pci Configuration” menu, double-check the various options and found that “Pnp Os Installed” is set to “Yes” (Plug and Play is turned on), but ” Assign IRQ For USB “entry is set to” Disable “(disabled), so once it is set to” Enabled “. Save settings and entered the Windows 98, the system immediately found new hardware, automatically install and configure the device drivers, the re-entering the “Control Panel”, double-click “System” icon, select “Device Manager” tab, found that “disk drive” election An increase of “Fujitsu Mhh2064At” equipment, while “hard disk controller” option to increase the “Usbide Buck Storage Adapter”. This time with confidence, and double-click “My Computer”, and finally see the “Removable Disk” icon!
